Category Archives: Uncategorized

What is the Best Elastomeric Roof Coating?

What is the Best Elastomeric Roof Coating?

Are you wondering what the best elastomeric roof coating is? Is so, you are in luck. Please review the following list of roof coatings to discover more.

  • Acrylic. Acrylic roof coatings are highly regarded in the roofing industry because they are both durable and inexpensive.
  • Asphalt emulsion. Asphalt emulsion consists of asphalt particles that are dispersed in water with clay used as a bonding element. These roofs are relatively inexpensive and easy to work with.
  • Butyl Rubber. This coating is known for extreme elongation and strength. As a solvent-based polymer, roofing professionals agree that it is highly reflective, fast-drying, and great for roof maintenance
elastomeric roof coating

Does Elastomeric Roof Coating Stop Leaks?

If your current flat or low-slope roof has existing roof problems, you will need for it to be cleaned and repaired properly before a new roof coating can be applied. This is because elastomeric roof sealers are understandably polymeric products. This means that they create a seal when they are applied to a roof. As far as sealing roof leaks, elastomeric roof coatings are very effective and can prevent existing damage from getting worse.

Can You Use Elastomeric Roof Coating on RV?

Are you wondering whether or not you can use elastomeric roof coatings on your RV? If so, you are in luck. An EPDM rubber roof coating is quite acceptable for most recreational vehicles and in particular, a weather-resistant formulation works very well. As any good roofing contractor can attest, RV-owners should absolutely invest in a material that is very resistant to ultraviolet rays and the ravages of rain.

Is Elastomeric Roof Coating Paintable?

Elastomeric roofing installation are an invaluable form of roofing. However, the question remains: are they paintable? Acrylic elastomeric roof coatings are not actually a paint. Elastomeric roof coatings have a resistance to ponding water and have reflective properties. If you have applied an elastomeric roof coating, then you will not want to paint it because it will not retain those favorable properties if you adjust it. Furthermore, if there is a warranty extended on your current roof coating, any not recommended adjustments will void the warranty. You will want to consult with a professional roofing contractor if you would like to change the color of your elastomeric roof.

Can You Thin Elastomeric Roof Coating?

While it is potentially possible to thin paint, it is not recommended for elastomeric roof coatings to be thinned. This is because the properties that make elastomeric roof coatings special, such as waterproofing abilities, and resistance to ponding, will be diminished with thinning. It is also recommended that elastomeric roof coatings are not applied over a wet membrane, substrate, or coating. 

What is Elastomeric Roof Coating Used For

If you are not already aware, elastomeric roof coatings are used for a variety of roofing scenarios. The vast bulk of elastomeric roof coating purposes circulate around sealing and protecting underlying roofing materials. At the end of the day, the best and main purpose of a strong roof is to remain resilient in the face of incleemnt weather. A well-applied elastomeric roof will be able to do so.

Can Elastomeric Roof Coating Be Sprayed On

If you are looking to spray your elastomeric roof coating, you will be please to find that it is preferable for these coating to be sprayed. For the process, you will want a large airless sprayer in order to spray the roof coating effectively. Apparently, elastomeric roof coatings need a tip of forty thousands or higher. A direct immersion style airless sprayer could be optimal. A professional roofing company will have such tools available for your elastomeric roof application.

Does Elastomeric Roof Coating Work

One of the most important questions that any roofing professional can be tasked with answering is whether or not elastomeric roof coatings work. Any professional will firmly state that they do. However, the difference between an amateur roof coating and a professional roof coating is wide. Professionals will cleanse and repair the roof before attempting any roof coating applications.

elastomeric roof coating

Where to Buy Elastomeric Roof Coating

As previously alluded to, elastomeric roof coatings are best applied by a team of roofing professionals. A professional roofing company will have access to vendors who sell roofing materials. This is in contrast to a handyman, who will need to get the job, then get the materials, then perform the job. A roofing company will already have access to these routes. With the proper roofing materials, your roof will perform better, and last longer. Installation methods also matter. When the roof is accurately cleaned and prepped, in addition to repairs, the roof coating will appear and perform at its best.

For the best elastomeric roof coating in Cincinnati, OH, you can trust our team to deliver. Please give us a call at 513-342-8544 today!

What Does a Commercial Roof Consultant Do?

flat roof with some water stains

What is a commercial roof consultant?

Buying a roof for a commercial building isn’t like buying a new copier or choosing a coffee vender. Commercial roofing is more expensive to start with and the idea is to get a long useful lifespan from the roof. That is where a commercial roof consultant comes into the picture. 

A commercial roof consultant will provide you expert guidance on how the design and build of your commercial building roof for a new build. For an existing roof that is problematic, a commercial roof consultant will advise whether to repair or replace the roof. 

If a new roof is determined, the consultant will guide you through the process of choosing the right type of roofing material for your commercial building. Most commercial roof consultants have never been on the installation end of commercial roofing, it is ideal if you can bring your consultant and roofing contractor together to combine their expertise and skills. 

What does a roof consultant do?

A commercial roof consultant keeps the planning process in order with their organization expertise to provide you a useful and long-lasting roof. They have an unbiased opinion and system selection when it comes to product, putting your needs ahead of the roofing contractor, but they will seek advice and suggestion from the contractor. 

Why do you need a commercial roof consultant?

Do you need both and which one do you take your final advice from, the commercial roof consultant vs roofer? It is obvious the roofing contractor is the hands-on person, but let’s clarify what you can expect from a commercial roofing consultant: 

  • Roof inspection and survey to determine the useful life of existing roof
  • Analyze any leaks to determine the cause
  • Specification for roof replacement projects in writing
  • Quality assurance inspections during installation
  • Construction consulting during any insurance claims
  • Roof asset management 
  • Overwatch contractor bids during the bid process
  • Building designs and inspections
  • Moisture survey and analysis
  • Expert witness during litigation

What is the useful life of a commercial roof?

A commercial roof that is professional installed and maintained as recommended by the manufacturer, the average lifespan for a commercial roof can range from ten to forty years. The variances in the lifespan range is based on several factors: 

  1. Installation: If the roof isn’t installed correctly, the lifespan is shortened. Hiring an experienced commercial roofing contractor is always recommended. 
  2. Slope: The roof slope, or lack of slope, will determine how water pools or sheds which will affect the roof’s lifespan. 
  3. Ventilation: All roofs need proper ventilation under it to  prevent heat and moisture build-up. A roof that has moisture under it will rot the roof decking and cause mold growth. 
  4. Maintenance: Routine commercial roof inspections and proper maintenance can prevent small problems growing into bigger problems. 
  5. Weather: When you have experienced harsh weather roof damage, you need to file an insurance claim. A commercial roof consultant can be help in filing the claim.  

What is the best material to use for flat roofs?

Commercial roof consultants and roofing contractors recommend PVC over other roofing materials. It is the more expensive roofing material over other single-ply materials, but the benefits balance that price. 

  1. Reinforced membrane makes for impact resistant, crack resistant roofing
  2. Low maintenance 
  3. Reflective white roofing lowers energy expenses 
  4. Reflective white roofing eases workload on HVAC system

How long do rubber roofs last?

An EPDM rubber roof is made from recycled rubber and when installed correctly, with proper maintenance, can provide coverage up to fifty years or longer. 

flat black roof

What is the longest lasting roofing material?

Metal is one of the most recommended material for commercial roofing material by commercial roof consultants and roofing contractors.  With expert, professional installation process, while it is the most expensive, it has the longest lifespan up to thirty years. 

TPO is another popular roofing material that commercial roof consultant recommend in many cases. It is inexpensive with a decent lifespan up to twenty years. The white-coating is UV reflective, an energy saving benefit, and unlike EPDM, there is little maintenance because of the heat welded seams. 

Modified Bitumen is often compared by a commercial roof consultant because of the budget-friendly price range. With an asphalt membrane base, it is subject to blister and crack sooner than other roofing materials, giving it a shorter lifespan of ten years. 

If you aren’t sure how to find a commercial roof consultant, an internet search is easy and fast. You can also ask your insurance company for recommendation and some roofing contractors may offer names of ones they have worked with in the past. 

Just like a roofing contractor, or any profession, a commercial roof consultant will have a fee for their services. You should get a few quotes that state the fee and what is included for the fee charged. Most will offer a contract, if not, ask for one, especially if they are going to represent you legally. Call 513-342-8544 today for your commercial roof consultation.

How is a roof inspection done?

contractor conducting roof inspection

Inspecting and Understanding Your Roof

Commercial roofing is different than residential roofing, and then again, it isn’t. The roofing on commercial and residential structures both protect the structure, contents, and people inside. However, in most cases, the roof on a commercial building is more significant than a residential roof.  One area they both are alike is the need for a roof inspection, either for monthly maintenance or possible roof damage. 

The purpose of a roof inspection is to check the normal wear and tear or see if there is any damage after a storm.  For residential roofing, a roof inspection serves the same purpose, but on a smaller scale, and it isn’t as intensive because there are different roofing materials. A professional commercial roof consultant is a person that can determine if roof repair or roof replacement is needed.  

What does a roof consultant do?

A professional roof consultant is trained in commercial or residential roofing to know what problem areas look like it is repairable or a replacement. They will provide expert guidance to the building owner and manager on what is best and then work with them in the designing, installation of new roofing. They will teach the existing owner or maintenance team on the maintenance, repair, and upkeep of the commercial roofing. 

roof inspection

How long does it take to inspect a roof?

A commercial building roof inspection can take between 30 minutes to one hour. Factors that can determine the time it takes to complete a roof inspection are the size of the roof, the number of penetrations, the number of levels and sections, and the different types of roofs on the structure. 

How do I know if I need a new roof? and What is considered roof damage?

These are two popular questions when it comes to commercial or residential roofing. Nobody wants to spend money on a new roof. A commercial roofing consultant will schedule an appointment with the building owner or manager. A roof inspection may find any requires a new roof of the following signs of roof damage: 

  • 1. Sagging 
    • The roof gets wet when it rains, and nothing you can do about that. However, when water is still on the roof after the rain stops and the sun comes out, you may have a problem with sagging areas. Sagging areas on a roof can often be from compromised joists, rafters, or the sheathing, and could be an indication of a leak.  A roof consultant or inspector will examine this sagging closer with a thorough roof inspection and look for other sagging areas. 
  • 2. Musty
    • When you walk into a building and smell musty odors, there is mold somewhere in that building, and mold comes from moisture. Sometimes an excellent, thorough cleaning will rid the odor permanently, and adjusting the humidity level can keep it from coming back. However, if those things do not work, then there is either a plumbing leak or a roof leak. Either way, allowing that moisture to linger can do two things:  Cause health issues for your employees and customers. The leak will weaken the structure, either the roof, walls, or foundation, and compromise the structure’s safety. Contact roof consulting services that will perform a roof inspection to find where there is a possible leak. If no roof leak, then a plumber should be your next phone call. 
  • 3. Damage
    • Are you seeing peeling paint or water stains on the ceiling or walls? Are you placing buckets around the building inside to catch rain? That is annoying, dangerous, and tacky looking. Anyone can trip over these buckets, spill the water, and hurt themselves. Once you have to set a bucket out, even once, do an internet search for “roof consultant near me” and request a roof inspection. Any sign of possible water damage to the roof should be addressed immediately. Catching problems early on will minimize the amount of work needed to fix the leak and not need a completely new roof. 
  • 4. Blisters and Bubbles
    • Commercial roofing is typically flat or low sloped, meaning that it is prone to air pockets, bubbles, and cracks in the roofing membrane. These are places that come from moisture accumulating under the membrane through a crack or separated seam. Then air gets in there. Upon a roof inspection, if a blister or bubble is found localized in the membrane, the roof consultant will recommend repairs.  This blister or bubble needs to be removed, the area cleaned, and then repair made over the area. For a commercial building, if a blister or bubble area can be repaired, it gives the flat roof a longer lifespan before having to take on the cost of a new roof. 
  • 5. Energy Bills
    • Your roof may not have any apparent issues like blisters, bubbles, cracks, or separating seams, but you are noticing the energy bills are higher than the same time last year. While a slight increase should be expected, a significant increase may indicate you need a roof inspection. If the roofing membrane is ten years old or older, it may be time to have it re-roofed with a reflective roof coating. This re-roofing process can get another 3 to 5 years life out of the current roofing before you have to endure a new roof. 
  • 6. Drains
    • After the next torrential downpour, check the drains around the building, and if you don’t see water coming out of them, you need to have a roof inspection performed. Because commercial roofing is flat, often, the drains get covered up with debris, dirt, leaves, even small critters. These are things that a monthly roof inspection can watch for so that you don’t have to worry about clogged drains causing water to pond and puddle on the flat roof. 
  • 7. Loose Roof Material
    • Extreme weather conditions like heavy rains and high winds can cause damage to a commercial roof that isn’t visible from the ground. A roof inspection by your maintenance staff or a professional roof consultant will find if there are any loose or missing roofing materials. What you can’t see from the ground could be causing you higher energy bills, and it is also shortening the lifespan of your current roof.  
roof inspection

In Closing – What do you do if your roof blown off?

The first thing and most important thing is the safety of your customers and employees. If the entire roof has been blown off your commercial building, have everyone evacuate to a safe place immediately. Next, call the insurance company and a professional commercial roofing contractor.  Depending on the current weather actions, cover the area with plastic tarps or remove everything you can to a safe place. 

Keeping your commercial building insurance current and valid is essential just for reasons like this … The unexpected and unplanned. We never know what weather Mother Nature has in store for us. An evacuation plan will inform everyone where to go in an emergency so that headcount is essential. 

What is the Best Material for Agricultural Buildings?

grain silos

Durable materials for agricultural property

An agricultural building is about the structures that are usually found on farms and ranches. These buildings are used for various purposes, such as a barn to house cattle, horses, and other livestock, as well as equipment, fodder, grain, hay, implements, poultry, or other items considered to be agricultural products. An agriculture building roofing needs to be secure and strong enough to keep the things housed inside them protected and safe from the elements. 

What is agricultural roofing, and why agricultural building roofing so important roofing? Because agricultural buildings are usually in rural areas, as we mentioned above for various animals, barns, farmhouses, and sheds. Metal roofs are commonly used in these rural applications because of their durability and low maintenance. Those two features are essential for agriculture building roofing. 

What kind of metal is used for roofing?        

Metal applications for agricultural purposes have been a long-tested practice, especially for agriculture building roofing, with little to no failure. It is durable, weather-resistant, fire-resistant, and has a long lifespan and warranty. When we consider it, it’s a low maintenance material. It would difficult to compare using metal or shingle agricultural roofing. 

 There are various types of metal used for agricultural building roofing material, and all-purpose panels may be the most popular and best agricultural building roofing. All-purpose groups are available in a variety of paint colors and profiles, with 29 gauge being the most standard thickness. This type of metal won’t chalk or fade, has lifetime integrity. 

The following are the five most popular types of metal used for agricultural building roofing:

  • Rib Metal Roofing – this is used for agricultural building roofing and other projects around the farm or ranch. 
  • Hi-Rib Metal Roofing – this agricultural building roofing looks good and doesn’t require as many fasteners, making it more affordable.
  • 5V Metal Roofs – the most commonly used for agricultural building roofing purposes, but because of its appearance, it has a visual appeal that can be used for other applications, including indoor.
  • Standing Seam Metal Roofs – this agricultural building roofing product has concealed fasteners, creating a sleek finished product that works well on agricultural structures as well as residential applications.
  • Corrugated Metal Roofs – the most recognized of all metal roofing products and is used for DIY interior design today. 

What are the disadvantages of metal roofing?

You don’t have to use metal on agricultural structures, but compare the pros and cons of Agricultural building roofing vs traditional roofing:

Metal agricultural building roofing benefits:

  • Long Lifespan: Metal agricultural building roofing can have a lifespan from forty years to seventy years or longer, depending on the gauge of the material. Traditional asphalt roofing has a life expectancy between twelve and twenty years. 
  • Durable:  Some metal agricultural building roofing can sustain winds up to 140 miles per hour. Metal roofing doesn’t corrode or crack and, depending on the gauge of metal, maybe impact-resistant. Also, metal agricultural building roofing doesn’t need periodic maintenance that other roofing materials do. However, annual inspection, or inspection after a weather event, is recommended.
  • Safe: Metal agricultural building roofing is fire resistant. 
  • Energy-efficient. Metal agricultural building roofing reflects solar radiant heat, and 0can reduce energy costs for cooling by up to twenty-five percent. 
  • Eco-friendly: As much as 95% of metal agricultural buildings, roofing is made from recycled materials and is 100% recyclable at the end of its lifespan.  Other roofing materials, like asphalt shingles, add as much as 20 billion pounds annually to the dump.

Metal agricultural building roofing disadvantages

  • Expense: Metal agricultural building roofing can be up to three times more expensive than other materials, but the ROI will come with the lifespan. 
  • Loud: Metal agricultural building roofing can be noisy during heavy rain and hailstorms. Added insulation at the time of install can minimize this some, but that will add to the cost. 
  • Contracts and Expands: The larger panels of metal agricultural building roofing tend to contract and expand with temperature changes. If the roofing contractor doesn’t attach them properly, the groups will loosen. 
  • Color Inconsistency:  When metal agricultural building roofing needs repair later, the color may not be exact.
an agricultural property

How do you install a metal barn roof?

Metal agricultural building roofing has always been found on barns in rural areas, large and small. Metal roofs install more accessible than asphalt shingled roofs, or other types of roofing material, and can be done in fewer steps. 

  • Step One: Measure the base of the barn to get the length and width measurements and multiply by two for the square footage. This measurement will determine the amount of materials needed.
  • Step Two: Lay the first metal roofing piece, starting in the bottom corner, setting it flat on the sheathing underneath and using a metal screw to fasten down the piece on either side, spacing the screws every twenty-four inches apart. 
  • Step Three: Lay the second metal sheet, overlapping one ridge to the first sheet, continuing the process all the way around. 
  • Step Four: Using tin snips, cut the end piece down to size if necessary, moving up the row until complete. 
  • Step Five: Inspect the agricultural building roofing to make sure all pieces of the metal are fastened down and no loose screws. 

Can I install a metal roof myself?

With a couple of friends over the weekend, yes. Wear good quality gloves, goggles, and have sturdy ladders, a good pair of tin snips, and a lot of patience.  The best quality of roofing is when a professional roofing contractor does the install, but if it saves enough money to make it worthwhile, it can be a great DIY project. Call 513-342-8544 for your metal roof installation needs in Cincinnati, OH.

Do Green Roofs Really Work?

completely finished green roof

Updating Your Roof

A green roof isn’t referring to the color of a roof anymore. It is a roof that has living plants thriving on top of it. They are common in Europe, where they learned the benefits that having a green roof provide not just the structure it’s on, but the surrounding area too. There are many possible reasons to consider a roof like this. For more information about a green roof for your Cincinnati, OH, give us a call at 513-342-8544.

What is the benefit of a green roof?

There are several green roof benefits, some directly to the building and others that affect the nearby area, like less footprint left behind.

  • Provide insulation for structures and reduces cool costs
  • Reduces urban heat effect
  • Improves air quality
  • Increase of native plant varieties
  • Provides a refuge for endangered birds
  • Improves marketability and property value
  • Green roof drainage minimizes storm water runoff and water retention
  • Improves efficiency of mechanical equipment
  • Extends roof lifespan
  • Provides pleasant environment view for occupant enjoyment and meetings 
  • Tax benefits

 If planting a green roof isn’t possible for your structure, another option for a green roof vs traditional roof is applying roof coatings. For a flat roof structure where a green roof of plantings isn’t possible, applying an EPDM, PVC, or rubber type coating is considered a version of green roof. 

How long does a green roof last? 

Having a green roof has been the standard in Europe since the 1960s.  A green roof will protect the original flat roof membrane, extending its life up to 50 years, with 40 years being the average.  Factors that come into play determine the life span of a green roof is the health of the original roof, how well the green roof is maintained, and the normal climate and environment concerns for any roof. Within the estimated forty years, a green roof can save the owner as much as $200,000 in energy expenses. 

green roofing with sitting area

Do green roofs leak?

When you compare a green roof to a traditional roof, it isn’t any more prone to leaking. It isn’t what is on top of the roof that determines if it will leak or not, but the structure’s design and integrity. To make sure a green roof doesn’t leak, it needs proper drainage and waterproofing membrane, just like a traditional roofing.

Studies have proven that a green roof will give a roof a longer lifespan than a traditional roof because it protects it from the sun’s ultraviolet rays. Not that a green roof doesn’t have its faults, though. 

The first downside to a green roof is the expense. When compared to the installation of a traditional roof, a green roof costs more, but it also has a higher ROI. Another downside to a green roof is the increase of weight on the structure. This is often part of the higher expense to install is having the structure reinforced. A green roof requires more maintenance than a green roof. A green roof requires feeding, watering, and weeding. With the right type of plants, you can minimize that maintenance. 

Do green roofs need maintenance?

A green roof is like any garden, there is some maintenance required. How much maintenance will depend on the type of green roof you plant. The more intensive the roof garden, the more maintenance it will require. The climate and environment will factor into the amount of maintenance needed.

How do you maintain a green roof?

There aren’t any simple instructions on green roof maintenance, but some basic green roof maintenance tips:  

  1. Weed the unwanted plants out, this is especially important the first season. If they are allowed to grow and run free, the plants will be crowded and kill them out.  
  2. Keep drainage free of debris and plants. If debris and plants cover the drainage, the garden roof can’t drain.
  3. Compost should be added biannually with nutrient-rich compost. Autumn and spring are the recommended time of the year.  
  4. Time to weed the unwanted plants out again! Birds and wind will blow seeds of other things on to a green roof, and not all of them are things you want. A monthly walk through your roof garden suffices to inspect and monitor your green roof and pull out the unwanted growth.  
  5. A green roof won’t need as much watering as a traditional garden, the biggest reason is the added weight that can add to the structure. Choose plants that are four to six inches of desert plants because they need the minimal water.
  6. During your monthly walk through your garden roof, watch for diseases and pests. A garden roof top will attract more insects.
  7. Keep a maintenance diary and log all the details such as when you feed, water, and weed.
completed green roof

Up On The Roof Top

If a green roof sounds like something that you’re interested in, have a structural check of the building to make certain it can support the weight. Even if you’re planning on planting and maintaining the garden yourself, have a professional roofer make sure the existing membrane is in good condition and get a quote to have them install a waterproof membrane if needed. Dial 513-342-8544 for even more information about a green roof in Cincinnati, OH.

Are Foam Roofs Any Good?

Contractors Apply Foam Roofing.

Are foam roofs any good?

Like any kind of roofing system, foam roofing has its pros and cons. Overall, however, the pros often outweigh the cons when it comes to this lightweight material. It’s especially valuable for commercial flat roofs, but can be applied to homes with flat roofs as well. Foam is directly applied over the original roofing material, creating a seamless membrane over it. This membrane is highly water resistant, so leaks become less of a worry, and serves as thermal insulation, so the roof’s energy efficiency improves. This material is dense, so you may not even need attic insulation. 

Moreover, foam is durable. Can you walk on a foam roof? Yes, it handles foot traffic well. It will also last a long time if well maintained. On the downside, foam by itself deteriorates in the sunlight and can be dented easily, so it requires a coating like silicone or acrylic applied over it for added protection. The chief maintenance requirement, then, is that the coating needs to be reapplied every 10 to 15 years. With such maintenance, the foam roof could last as long as 50 years. If you are interested in foam roofing installation in Cincinnati, OH, turn to the experts at Allstate Roofing, LLC. We can help you with all your commercial roofing concerns. Find out how we can help by calling 513-342-8544.

What is a foam roofing system?

Foam roofing and coating are often used as an alternative to roof replacement. These two materials combined form a complete roofing system that fits over your old roof. The foam, commonly called SPF spray foam, is a combination of isocyanate and resin. When these materials mix in the spray nozzle they react chemically, and as they are sprayed over the roof they expand and form a lightweight solid membrane over the roof. To keep the foam from decomposing in the sun, an elastomeric coating like acrylic or silicone is applied over it. This coating not only protects the foam, but it also provides additional protection to the roof and additional insulation.   

Is spray foam worth the cost?

Foam roofing is often applied to commercial roofs as an alternative to roof replacement. When compared to the cost of a full roof replacement, you’ll be saving quite a bit of money with spray foam. You don’t have to, for instance, remove your old roof. Foam is directly applied to it after it is cleaned and minor repairs are made. Because spray foam improves your roof’s insulating abilities, you’ll also discover cost savings on your energy bills, which is always a plus. The main downside as far as maintenance costs go is that it requires a reapplication of roof coating to preserve the foam from deterioration and damage. Of course, this expense is only required every 10 to 15 years or so.  

Can spray foam rot your roof?

You may have heard that spray foam can rot your roof. This is primarily a concern for spray foam applied as insulation on the underside of roofs. It’s generally not a concern of foam roofing applied over an old roof. Still, since the materials used for these applications are similar, there may be concerns about both in regards to rotting. The concerns are generally unfounded. Spray foam, inside or out, will not cause your roof to rot. Moisture is always the culprit when it comes to rot. The open-cell spray foam that is used as insulation actually can help prevent water from getting caught between your roof and the insulation. The foam allows moisture to pass through it, keeping it from collecting. If the water collects between your roof and insulation, this is where you can potentially have problems with rotting.

How to apply foam roofing

Foam roofing is fairly easy to apply, especially for trained professionals. Here is what to expect when professionals like those at Allstate Roofing, LLC install spray foam on your roof.

  • The roof is cleaned of all dirt and debris.
  • The spray foam is then applied directly over the old roof. It is allowed to expand and then solidify.
  • An elastomeric coating like silicone or acrylic is then applied over the foam for added protection.

The installation normally takes no more than two or three days and will not disrupt business operations.

Foam roofing for commercial building

Foam roofing is primarily used on commercial roofing. It’s a very versatile material. It’s ideal for flat roofs as well as metal, as it adheres to most surfaces. At the same time, it can be used on residential roofing, though it’s not recommended for shingle roofs.

Roofers Spray on Foam Roofing.

Foam roofing near me

If you are considering foam roofing in Cincinnati, OH, you can always count on the professionals at Allstate Roofing, LLC. We offer an extensive range of commercial and residential roofing solutions throughout the area. Find out what we can do for you or schedule a service appointment with us by calling 513-342-8544.

Are Aluminum Roofs Good?

aluminum roofing

Are Aluminum Roofs Good?

Aluminum roofing has received accolades for many years. But what are the relative advantages of having an aluminum roof? Generally speaking, metal roofs have a wide host of advantages that are beneficial for homeowners. Metal roofs can last two or three times longer than asphalt shingle roofs. There is a fifty to sixty-year lifespan for high-end metal roofs. These high-end metal roofs include standing-seam metal roofs and aluminum shingle roofs. For roofs made of zinc or copper, the roof life can be well over one-hundred-years. 

How Long Does an Aluminum Roof Last?

Aluminum roofing shingles not only have a longer roof life than their counterpart, asphalt shingles. As a matter of fact, metal roofing has an excellent reputation as a roofing material. Aluminum and aluminum compounds have been used for over millennia. Aluminum is fire resistant, wind-resistant, and impact resistant. Aluminum is a soft metal, so it will need to be inspected after a hail storm. While aluminum does have a high initial cost, aluminum roofing generally lasts forty to sixty years, meaning it only needs to be replaced once a lifetime.

Are Aluminum Roofs Expensive?

Aluminum roofs host a bevy of exceptional virtues. In exchange for these valued roofing virtues, a price must be paid. Aluminum can be quite expensive and is reputed to be one of the most expensive roofing materials on the market. In order to find the best estimate on aluminum roofing materials in your area, please be sure to consult a professional, insured roofing company. A professional roofing contractor will be able to go over your roofing options and give you an appropriate and realistic purview of what roofing material will be most affordable on your budget.

Why is Aluminum Used for Roofing?

Aluminum is especially interesting in the roofing world because it is corrosion-resistant. Even in highly industrial or corrosive environments, aluminum stands strong. This means that it is a highly sought after roofing material due to the fact that rust affects many metal roofing materials on the market. Metal is used for roof flashing, which utilized around vents and chimneys. When water penetrates roofing systems, it can wear down the roof over time. Aluminum is resistant to rust, which makes it an attractive roofing material.

Do Aluminum Roofs Rust?

Metal roofs do rust over time. This is true of tin roofs, aluminum roofs, and steel roofs. However, it is important to note that with the correct protective coating that a metal roof has the propensity to actively resist oxidation and rust formation.

Where to Buy Aluminum Roofing Sheets

If you are wondering where to purchase roofing materials, your best resource will be to move forward with calling a professional roofing company in your area. An insured and professional roofing contractor or project manager will be able to advise you with regard to aluminum roof installation and materials.

Aluminum Roofing for Mobile Homes

Aluminum is an exceptionally popular roofing material for mobile homes. If you have a mobile home and you are experiencing roofing issues, the best pathway forward is to determine whether roof repairs are in order or a total roof replacement. Over time, roofing material does wear down. In circumstances where you are experiencing a leaking roof, it is important for you to consider different roofing options. There are three popular types of roofs for mobile homes: rubber roofing, aluminum roofing, and asphalt shingles. Roof longevity will be a key factor in determining the best option for your roof.

aluminum roofing

Aluminum Roofing for Decks

There are a number of excellent roofing options for decks available on the market. For instance, a metal gazebo with screens could be an admirable choice for a family that wants to add shade and a screen for bugs to their outdoor events. A hardtop gazebo with a twin-layer aluminum roof is another choice that would be accessible for homeowners. Of course, there is always a wall-mounted slanted metal roof, which can be professionally installed by a roofing company. Corrugated metal roof decks offer affordability and durability hand-in-hand. Corrugated metal roof panels can be fabricated in different types of metal, such as stainless steel, aluminum, and Galvanized steel.  

Is Aluminum Roofing Good?

Are you considering an aluminum roofing installation? If so, it will be important for you to weigh the following advantages when pondering your roofing options. Please review the following bullet point list to determine more about this kind of roofing.

  • Exceptional durability. Aluminum roofs are resistant to cracking, warping, or burning.
  • Corrosion-resistant. Aluminum roofing is corrosion-resistant, unlike other metals.
  • Longevity. Aluminum roofs can last as long as forty to seventy years, making them an admirable choice for many homeowners.

You need a roofing company that knows how to install aluminum roofing in Cincinnati, OH with excellent results. Call Allstate Roofing, LLC at 513-342-8544 to speak with our staff about making an appointment today!

Do roofs need to be cleaned?

damaged roof with black spots

So, is Roof cleaning necessary?

Does it really matter if a commercial building has a dirty roof? If the roof is flat, how would you know I the roof looks dirty, anyway?   Roof cleaning is an important and necessary step for owners and managers of commercial buildings, just as it is for a home. 

If you got a dirty roof, then you have algae, bacterial, lichen, mildew, and moss up there, eating away at the surface coating, which is why dirty roof cleaning is so important. A professional roof cleaning is much cheaper than replacing or repairing a roof, which is what will happen, eventually.

Does cleaning your roof damage it? 

Usually, professional roof cleaning is a good idea at least once every 12 months. A monthly inspection can be done by a facility or building manager, but a professional should do your roof cleaning. Why?  Because if it isn’t done right, then yes, it could damage your roof.   

When a professional roof cleaning contractor does the job, they have the right chemicals, equipment, and knowledge so that the roof is safe.  Neglecting the roof, such as not inspecting it, having maintenance and repairs done when needed, and the annual roof cleaning can be more harmful.

Why is my roof turning black?

Those black streaks and dark spots are gloeocapsa magma, which comprises dirt, grime, lichen, mildew, mold, soot, or otherwise called algae, and up close, it is blue and green. However, it has a protective dark pigment outer coating that doesn’t let the UV rays damage it. Unfortunately, it is damaging your asphalt roofing and the UV rays are baking it on, which is why annual roof cleaning is important.

Why do algae attack asphalt shingles? Algae are airborne spores that get carried away by the wind and animals that get on your roof, like birds, squirrels, etc. Once airborne, they spread quickly from the roof to roof, throughout the neighborhood. It doesn’t know if the roof is on a $20,000 house or a $100,000 house or a $1 million-dollar commercial structure.

clean roof flat and black

What causes roof stains?

Those roof stains, or commonly referred to as black streaks, and never really were a problem until twenty years ago. That is when shingle manufacturers began adding limestone for a coating on their shingles and to add weight to the shingles. There is an additive that can be added to shingles today that impede algae growth, but older asphalt roofing is still experiencing the black streaks.

Typically, those black streaks are formed on the north side of a roof. This is the side that is dark and wet, the perfect environment for algae growth. Algae grow in a blue-green color organism that forms a coating for protection against UV rays. As it decays, it turns black. Having your roof professionally cleaned once a year will minimize, even eliminate this growth from taking place.

How do you clean a stained roof?

It’s hard to justify having your roof professionally cleaned simply to remove those black stains and streaks. When you do go forward with it, you get conflicting information about the best roof cleaning process. Here, we describe three different roof cleaning processes that are used the most by professional roof contractors.

The eco-friendly method

Everyone is about being eco-friendly these days, and roof cleaning companies are all about that too. For years, the chemicals they used were toxic and damaging to the eco-system. Today, they use a low-pressure rinse system with high-grade products that are eco-friendly, with no toxic chemicals like chlorine bleach or phosphates that are known for polluting the water system and vegetation.

  • The Pros: On Average, the results are complete and instant with the algae, lichens, and other factors totally have gone while the contractor is still on site. The equipment and products they use are gentle on the roof, but tough on the black streaks.
  • The Cons: This is an expensive roof cleaning method because of the eco-friendly products.

The chlorine-bleach method

This method of roof cleaning uses chlorine bleach (sodium hypochlorite) mixed with other chemicals like TSP (trisodium phosphate). They spray it on the allowed to dry, reapply again if needed. The black streaks do not come off immediately, it usually takes a good rain to see the clean roof.

  • The Pros: A less expensive roof cleaning methods because the cost of the chemicals isn’t expensive, and the technicians do the work from the ground.
  • The Cons: The chemicals have a strong odor and the results aren’t immediately noticed, especially if there are colonies of moss and lichen present. This roof cleaning method is harmful to humans and animals if they become exposed to fluids or fumes. Landscaping can be damaged permanently because of the chemicals, as can the waterways.

The high-pressure method

A high-pressure roof cleaning method has been used by contractors for years.

  • The Pros: There aren’t any.
  • The Cons: High-pressure roof cleaning method damaged shingles, but it does not remove the organisms that cause the black streaks effectively. The algae return because the high-pressure power roof cleaning method leaves the root system of the algae behind.

A regular routine of roof inspection and roof cleaning is needed to maintain a healthy roof, which protects the largest investment you’ll ever make – your business.  By reviewing the pros and cons we’ve shared with you that the three main roof cleaning methods have, this should help you choose the right roof cleaning contractor. Call 513-342-8544 today for commercial roof washing in Cincinnati, OH.

Should I Replace or Restore My Roof?

applying roof restoration coating

Updating Your Building and Roofing Structure

No matter what kind of property you own, there will come a time when you need to update your roof. For some, that will require a complete replacement where everything is stripped down to the decking and built back up with newer materials. For others, there are options on the market that will not only benefit your roof but save your wallet some money. One of those options is actually restoration. Restoring a roof is a great way to update the structure without wasting time or money. For more information about a roof restoration in Cincinnati, OH, dial 513-342-8544 to connect with Allstate Roofing, LLC.

roof restoration in the process

Benefits of a Roof Restoration

What exactly is a roof restoration? Restoring your roof is the process of cleaning, repairing, and reinforcing your roof so it is a sound, safe, and reliable structure. What makes it different from replacement or repair services is that a professional contractor will install a layer of protective, restorative material over your existing roof. This process can and does provide a variety of benefits for property owners such as:

  • Safety: One of the biggest benefits of a restoration service is the increased safety. Most restoration materials are Class A fire resistant which means, even if they were to be struck by lightning, they will not catch fire. This is incredibly important and crucial for safety.
  • Tax Benefit: Believe it or not, but restoring your roof could actually help you get some money back during tax season. That’s because roof restoration costs are considered maintenance expenditures rather than capital expenses. What that means is, you could see several tax benefits since you aren’t spending general money to update your roof.
  • Extended Life: Thanks to the durability of the materials used, a restoration will help to extend the life of your roofing structure. Generally speaking, most roofs have a lifespan of about 15-18 years. With a restoration service, you can see an extension of about 5 to 10 years longer.
  • Energy Efficiency: Most restoration coatings are white or light in color. This will help to deflect heat and light absorption, in turn, helping your HVAC system operate more efficiently. Since it won’t have to work double-time to regulate internal temperatures, you will be able to see money savings a few months after installation.
  • Money-Saving: Roof restoration installations are highly durable and reliable. They can withstand constant sun exposure, wind, rain, grease, and even some chemical exposure. All of this is to say that shelling out money for regular repairs will reduce once you have a restoration completed on your building.

The two biggest benefits that draw property owners in are the tax benefits and the energy efficiency benefits. Even during the winter, with a restored roof you’ll potentially find fewer and fewer times when you need electric heater repair in Stryker, OH or wherever you are. For more information about a restoration service, connect with Allstate Roofing, LLC.

Roof Restoration vs Replacement

Depending on the condition of your roof, you may have the choice between a restoration and a complete replacement service. So which is the better choice? Is a roof restoration really worth it? Well, as always, that depends on your situation and your needs. If your existing roof is still in good condition but could use an update, then a restoration will be financially beneficial. That in mind, if your roof is in poor condition with holes, missing sections, and leaks, a restoration will only exacerbate the problem. In that case, replacing the roof will be the better option.

Frequently Asked Questions

  • How much does a roof restoration cost? 
    • The final costs will depend on a variety of things. The size of your roof, the current condition, and more. On average, property owners can spend between $2,000 and upwards of $10,000 on a restoration service. Again, that total is dependent on a number of things.
  • What does roof restoration mean?
    • Restoration is in reference to the process of cleaning and restoring a roofing structure. Rarely, if ever, will sections of your roof need to be completely removed. Unlike a replacement service, this process maintains the structural integrity of your existing roof while adding a protective layer over top. 
  • Does roof coating stop leaks? 
    • While a roof coating can help prevent future leaks, and even address minor leaks, if there is a pervading problem, it won’t help. In fact, a new coating can just mask the problem so it festers and becomes worse. That’s why part of the restoration process involves cleaning and repairing only the sections of a roof that need it.
  • How long does a roof restoration last? 
    • Most roof restoration materials will last about 10-15 years before they need to be resealed. That in mind, that can be an additional 10-15 years added to your existing roof, which means that it can last much longer than anticipated. 
  • How long does a roof restoration take? 
    • A well done roof restoration should take about 2-3 days. This isn’t to take time out of your day, but to ensure that the entire surface is adhered correctly and not going to cause a problem. In many cases, it can be done within a day so long as the weather permits. 
metal roof restoration coating

Connect With Our Team Today for More Information

If you are interested in a roof restoration for your Cincinnati, OH, connect with Allstate Roofing, LLC today. We are the leading roofing experts in the area with years of commercial work and experience. Call us at 513-342-8544 to get started! 

What Is Cool Roof Technology?

Roof Ventilation of a Factory's Cool Roof

Learn More About Cool Roof Systems

Roofing materials and environmental sustainability have greatly been put at the forefront in the housing market and with the construction of both commercial and residential properties. Now it’s become integral to cut on energy usage from roof heat absorption and roof replacement with premature wear from the sun. The implementation of cool roof systems has been taken on more and more with their many benefits of reducing HVAC energy costs and saving properties form damaged from the sun. There are many many material options out there that can match any preference and are a great way to increase the value of the home. In order to get the most out of your cool roof system, it’s best to get in touch with a professional roofing company to discuss your options to see how it pertains to the specifications of your property. Until then, refer to the following information concerning a cool roof that could prove useful to you on your journey for a cool roof.

Do Cool Roofs work?

A cool roof will be designed to reflect more sunlight and absorb less heat than traditional roof counterparts. Essentially a dark-colored traditional roof will absorb the heat from the sun making it warm and heating the building. With cool roofs, your overall building temperature is cooler with less heat transmitted.

How much energy does a cool roof save?

A cool roof with ENERGY STAR certified roof products can help reduce peak cooling demands in a building by 10-15%. Essentially a cool roof will help reduce the amount of air conditioning needed in buildings by having cooler overall building temperatures already. This will aid the HVAC system in having smoother temperature changes for building operations which draws less energy.

What color roof is most energy efficient?

A cool roof will be the most energy-efficient when the roof is of a lighter color as dark colors absorb more rays and therefore more heat. Typically conventional roofs will reflect 5-15% of the sun’s rays and absorb most of the rest into heat while cool roofs will reflect 65%. The fewer rays absorbed will lead to a cooler roof.

What is a cool roof made of?

A cool roof can be made of different materials yet they can be made of highly reflective paint, sheet coverings, or highly reflective shingles or tiles.

What is a cool roof for residential?

A cool roof for residential properties may differ from those seen with industrial and commercial properties based on the roofing materials and profiles. Commercial and industrial roofs are typically flat so they hold entirely different roofing membranes such as single-ply roofing materials. Therefore they may incorporate a cool coating for roof that will provide reflective benefits. What’s more, certain materials for flat roofing will have reflective properties incorporated based on white roof colors. As such, a residential cool roof will incorporate such materials as metal, asphalt materials with reflective granules added to them, terra cotta, or any roofing material that is white or lighter in color. There are a variety of cool roof options for residential roofs so it’s best to weigh your options if aesthetics are preferable.

White Metal Cool Roof

What is the coolest roof material?

  • Terra Cotta and Clay
  • Cool Color Concrete Tile
  • Green/Living Roofs
  • Solar/Photovoltanic Systems
  • Rubber Membrane Roofing
  • White Barrel “S” Tile
  • White Flat Tile
  • White Metal Roofing

Cool Roof and Waterproofing Systems

Certain cool roof systems can additionally come with added roof protective benefits like those seen with flat roofing systems. A cool roof material designed to work with a flat roof additionally tackles the common problem of water damages by blocking water infiltration and protecting the roof from water leaks.

Cool Roof and Passive Ventilation

For properties that require additional passive cooling with a cool roof, implementing a good ventilation system can significantly reduce temperatures of a building and can be more effective when paired with a cool roof.

How much does a cool roof cost?

A cool roof will vary in cost depending on the location, climate, slope of the roof, roofing materials and roof coatings. A low slope roof may cost $0.75-$1.50 per square foot while a single-ply membrane may cost $2.50-$3.00 per square foot. Metal roofing, a high-quality roofing material, may, in turn, cost $7-12 per square foot.

Contact A Professional Roofing Company

To learn more about your cool roof options be sure to get in touch with a qualified roofing company for more information. They will be able to gauge your roof’s specifications, needs and budget to best determine the right cool roof solution for you. If you’re concerned about other systems of your property, like with plumbing services, reach out to the relevant avenues for assistance. Home improvement with quality constructing materials from the get-go will go a long way in reducing the cost of materials and energy usage in the long run. Benefit from a cool roof today and have a more comfortable interior environment.

If you’re interested in a cool roof in Cincinnati, OH call 513-342-8544 with Allstate Roofing, LLC!